Yamaha Raptor 660 (04-05) ECU replacer

$298.57 inc GST

This Performance CDI for the Yamaha Raptor 660 (04-05) increases rev limit 1,000 RPM over the stock (from stock CDI 9,000RPM to 10,000RPM).
In addition, this unit offers a re-mapped timing curve which yields a noticeable increase to horsepower and torque over the stock CDI.

This CDI box is a direct plug in replacement CDI.
Simply locate and remove the stock CDI, and plug the unit directly into the wiring harness, no modification needed.
Suitable for stock and modified machines.

SOLD OUT

Out of stock

Category: SKU: Yamaha PE-C-AY660-C Replacement.

Description

What’s better compared to the original unit:
– increased protection against over-voltage (such as a defective voltage regulator/rectifier, bad battery).
– higher resistance against a defective ignition coil and reverse battery connection .
acceleration correction: when the RPM increases the ignition delay changes (‘in proportion) resulting in a smoother acceleration.
digital technique: therefor the unit is more accurate and less sensitive to temperature changes.
optimized ignition curve/map to improve engine performance resulting in more power.
spark power control: the unit will change the output to the ignition coil when the battery voltage changes in order to keep the spark power the same.
start mode: during engine start there’s a start delay and the unit will give more current to the ignition coil for a faster start.

Brand

Carmo Electronics